There are only three things that are certain in life: death, taxes, and getting a dent in your truck or car. You can’t always account for runaway shopping carts, incorrectly hurled footballs, out-of-nowhere light posts, and other real-life annoyances, even though you’re as patient as possible.
The next thing on your mind, though you’ve got your dent or ding, is, obviously, how to get it out. Yeah, you can take it for repair to a body shop or friendly neighborhood mechanic, but their price estimates can be insane, especially if they want to first strip the paint or use body filler. 350 dollars for the tiny dent, or possible replacement?! I don’t think so.
Instead, save some of the hard-earned money for yourself and hire a paintless dent repair expert. Without scratching the paint, there are many ways to get a tiny dent or ding out of a car at home, and you don’t need to be a gearhead to do it.
Let us get to know about the best 8 ways in which you can get to fix the dents of your car and make it look brand new without any hassles and a lot of time.
Use a plunger
If you do it yourself, you can use a plunger, you can not only unclog a drain, but you can also get small to medium-sized dents out of your vehicle. This is usually ineffective as, typically, the plunger cannot get the right type of suction around the car body.
Use boiling water
One of the best ways to get a dent is to reverse the piece. So for rubber bumpers, because of how rigid the rubber is, even though you try to take off the bumper, it could still be hard to push out the dent. Boiling some water in a pot and tossing it on the dent solves this problem. This is a widely used paintless dent repair technique.
One way to get a dent out is to suction it out, but the challenge is to find a dent puller with the right amount of strength. You get the strength by having the surface area at full capacity. Oh, why not make one of your own?
Dry ice, used mainly as a freezing agent, can be used to get minor dents out of your vehicle. Keep down a piece of dry ice on the dent as long as you’re wearing protective gloves and rub it around until you hear the dent pop back into place.
Two common household items are another famous technique for extracting car dents from plastic material: a hairdryer and compressed air.
Begin by heating the car dent at its maximum temperature with the hairdryer, which will extend the car’s plastic. Grab the can of compressed air as soon as it’s hot enough, turn it upside down, and begin spraying the same area. The dent will pop out because the cold air will cause the plastic to contract.
The metal not only goes inward when a dent occurs on your vehicle, the surrounding edges often go inward, making something like a miniature volcano. That implies that the way to go is not to pop the dent out from underneath.
You may also use a Pops-a-Dent, or a suction cup dent remover product if you do not have any luck with any of the above methods.
If you’re willing to try something and don’t have a lot of equipment at home, call a paintless dent removal expert that has specially made equipment to remove car dents using many of the above comprehensive methods.
Have you tried any of these strategies, or have you ended up swallowing the bullet and hiring an auto body shop to do the job for you? Make sure to let us know if you have used a certain DIY strategy to remove dents and dings from your car.